Free shipping on orders over $35

Shop now
0

HPDAVV 10,000 lb Two-Post Car Lift, 3 HP Hydraulic Baseplate Lift with Adjustable Arms

$2,399.99

Equip your garage or repair shop for vehicle maintenance with the HPDAVV 10,000 lb Two-Post Car Lift. This hydraulic automotive lift provides underbody access for inspections, oil changes, brake work and other service tasks. It accommodates compatible passenger cars, SUVs, vans and light-duty trucks within its rated capacity, arm reach and vehicle lifting requirements.

The baseplate design connects the columns at floor level, leaving the top open without an overhead crossbeam. A 3 HP / 2.2 kW hydraulic power unit operates on 110V, 60Hz, single-phase power. Four adjustable arms in a 2+2 telescoping configuration offer approximately 30.2–45.4 inches of reach, while screw-adjustable lift pads help align the contact points with approved vehicle lifting locations. A single-side manual safety lock release allows the operator to release the locks from one side during the lowering procedure.

For installation planning, the lift measures approximately 134.2 inches wide and 112.6 inches high, with 109.4 inches between the columns and a 99.4-inch drive-through opening. Maximum lifting height is approximately 71.6 inches, excluding height adapters. Verify floor and anchoring requirements, electrical requirements and clearance for the raised vehicle before installation. Vehicle compatibility depends on weight distribution, dimensions and manufacturer-approved lifting points.

This lift ships by freight and requires suitable unloading equipment at the receiving location. If unloading equipment is unavailable, freight terminal or pickup-location delivery can be arranged.

SKU: WMT-PARENT-4EKUYTHAZI40 Category:
  • 10,000 lb Vehicle Lifting Capacity: Designed for maintenance and repair of compatible cars, SUVs, vans and light-duty trucks. Provides access to the wheels and underbody for routine service. Vehicle weight, weight distribution and approved lifting points must meet the lift specifications.
  • Open-Top Baseplate Layout: A floor-level connecting plate leaves the space above the columns free of an overhead crossbeam. The approximately 112.6-inch overall height helps with garage layout planning; adequate ceiling clearance for the raised vehicle is still required.
  • 110V Hydraulic Power: Equipped with a 3 HP / 2.2 kW hydraulic power unit configured for 110V, 60Hz, single-phase electricity. Supports vehicle lifting for garage and workshop service tasks. Electrical installation must follow the equipment requirements.
  • Adjustable Arms and Screw Pads: Four lifting arms use a 2+2 telescoping configuration with approximately 30.2–45.4 inches of reach. Screw-adjustable contact pads help position the lift at approved lifting points on compatible vehicles.
  • Manual Lock Release and Steel Construction: Features single-side manual safety lock release, steel columns and reinforced column bases. The locks can be released from one side during lowering according to the operating instructions.
  • Freight Delivery and Unloading: The receiving location must have a forklift, a tractor with a suitable lifting attachment, or other equipment rated to unload the shipment safely. The carrier driver does not unload the lift. If equipment is unavailable, terminal or pickup-location delivery can be arranged for collection using suitable transportation and unloading equipment.

Specifications

Vehicle lift type Two Post Lifts
Max load 10000 lb
Maximum lift 71 in
Brand Hpdavv
Vehicle fitment type Universal
Has written warranty No
Total count 1
Actual Color

110v, 220v

Reviews

There are no reviews yet.

Be the first to review “HPDAVV 10,000 lb Two-Post Car Lift, 3 HP Hydraulic Baseplate Lift with Adjustable Arms”

Your email address will not be published. Required fields are marked *

Related products